DYNACOAT DFL

Dynacoat DFL is a unique, water-based emulsion wax coating, which is used as a dual-purpose dry film lubricant and corrosion preventative. It is recommended for use on artillery shell casings, small arms ammunition clips, and other weatherproofing military applications. Dynacoat DFL is also an excellent corrosion preventive and dry film lubricant for steel strapping and is a good piano stringing lubricant. Dynacoat DFL is used as a torque reduction and corrosion resistant lubricant on various fasteners and as a dry film lubricant in the installation of various rivets. This product is recommended for use as a corrosion preventive and decorative coating on cast iron and over treated surfaces such as phosphated, bonderized, and anodized surfaces. Dynacoat DFL provides additional protection over all types of plating, including cadmium and zinc. The dry film lubricating and release characteristics of this product make it an ideal mold release. In addition, Dynacoat DFL can be used as a dressing on rubber, plastic and leather, or to provide surface protection and enhance the appearance of interior wood paneling.

DYNACOAT No.1
Clear inorganic sealer that will enhance the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome. Will increase thesalt spray resistance of a trivalent chromate and can extend the resistance of a yellow hexavalent chromate to over 500 hours.

DYNACOAT No.2

Enhances the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome.  The thin, uniform, water-repellent barrier coating will repel humidity and salt spray mist and provide superior corrosion protection.

DYNACOAT No.3
Water based clear, high gloss, acrylic finish. Contains no organic solvents. The cured finish will not dissolve in water and the resulting finish has good resistance to scuffing and scratching.

DYNACOAT No.4
Water based clear, medium gloss, acrylic finish. Contains no organic solvents. The cured finish will not dissolve in water and the resulting finish has good resistance to scuffing and scratching.

DYNACOAT TnT

Concentrated, water soluble, liquid product that is used to modify the lubricity of zinc and trivalent chromate coated fasteners, such that the load spreads at torque are reduced. This lubricating film, reduces the coefficient of friction with reproducible results, is dry to touch, non-evaporating and remains on the parts until ready to be used.

DYNACOAT WS

Dynacoat WS is a clear, medium gloss hard drying emulsion wax coating that is applied to metal surfaces. The resulting film will not rub off, has excellent adhesion, is ductile and offers good corrosion protection.

DYNAFIN CBS
Alkaline, chrome-based, cathodic passivating solution for copper, brass, bronze and silver. Helps prevent spotting and bleed out, common with cyanide plating solutions, and will increase corrosion resistance while preserving the colour of the deposit.

DYNAFIN CI No.1
Corrosion inhibitor used for protecting steel, nickel, aluminum, copper and copper alloys. Helps reduce staining and increases lubricity. Can also be used in burnishing operations.

DYNAFIN CI No.2

Liquid, chrome free, phosphate free corrosion inhibitor for zinc, ferrous metals and iron, zinc or manganese modified phosphate coatings. 

DYNAFIN CI No.3
Liquid, chrome free, corrosion inhibitor for un-plated areas on ferrous substrates following nickel and chromium plating.

DYNAFIN HCC
Additive used to reduce chromate leaching, rub off and staining. Will increase corrosion resistance on hexavalent chromates and can be used with yellow, olive drab and black chromates.

DYNAFIN ICS
Chromium containing iron phosphate sealer to increase the corrosion resistance of subsequent oil or paint finishes.

DYNAFIN NC

Dynafin NC is a liquid inhibitive rinse applied on most phosphate surfaces and is designed to promote paint adhesion and reduce drip and run-down staining while increasing corrosion protection. Dynafin NC is suitable for use on iron, zinc, calcium and manganese modified phosphate surfaces.

DYNAFIN WD

Water displacing, non-staining rust preventive which will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. Ultra thin, highly protective films can be easily applied using spray, immersion, brush, roller or flow coating application methods. Dynafin WD applied films are dry-to-touch and are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion, even under conditions of high humidity. Dynafin WD also acts as a lubricant and contains no metals except calcium.

DYNAFIN WD

Dynafin WD is an outstanding water displacing, non-staining rust preventive which will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. Ultra thin, highly protective films can be easily applied using spray, immersion, brush, roller or flow coating application methods. Dynafin WD applied films are dry-to-touch and are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion, even under conditions of high humidity. Dynafin WD also acts as a lubricant and contains no metals except calcium.

DYNAPASS HBS
Dynapass HBS is a liquid additive used to seal hexavalent black chromates.   When used as recommended, corrosion protection and uniformity will be improved while reducing scratching caused by bulk handling equipment.

DYNAPASS NPS

Dynapass NPS is a liquid sealer utilizing nano-particle technology that will enhance the corrosion resistance of phosphate conversion coatings.  Dynapass NPS is used as a post treatment.

DYNAPHOS OIL No. 1
Water-soluble rust preventative for steel and zinc phosphated steel. Dry to touch formulation that will add good salt spray protection when applied to Dynaphos HZ.

DYNAPHOS OIL No. 2
Water-soluble rust preventative for steel and zinc phosphated steel. Dry to touch formulation that will add 200 hours of salt spray protection when applied to Dynaphos HZ.