SOAK CLEANERS


Product Variants:

DYNAPREP BCR

Concentrated, powdered, low alkalinity soak cleaner used for the removal of buffing compounds from both ferrous and non-ferrous metals.


DYNAPREP DC

Two component, alkaline, heavy duty, low foaming immersion or spray cleaner for use on ferrous metals.  Dynaprep DC will provide effective cleaning of soils including heavily chlorinated, sulphurized oils, fats, coolants, buffing compounds and drawing compounds.


DYNAPREP HDC

Concentrated surfactant package blended with alkaline builders to provide a soak cleaner with excellent detergency and an electro cleaner with superior conductivity.  For even extra versatility in soak cleaning, Dynaprep SAS can be added to provide oil splitting or Dynaprep SAE for oil emulsifying properties.


DYNAPREP S100

Concentrated liquid surfactant package for the soak cleaning of steel, stainless steel and leaded steel. This is a high alkalinity, non-chelated, heavy-duty soak cleaner formulated to be effective in hard water areas. Can be emulsifying or oil splitting depending on caustic level, customer adds own caustic for best economy. Dynaprep S100 is Nonyl Phenol (NP) and Nonyl Phenol Ethoxylate (NPE) free.


DYNAPREP S110

Liquid surfactant package for the soak cleaning of steel, stainless steel, leaded steel and aluminum.  This is a high alkalinity, heavy-duty soak cleaner formulated to be effective in hard water areas.  Nonylphenol and nonylphenol ethoxylate free.


DYNAPREP S130 SS

Unique powdered alkaline blend specifically developed to remove all types of soils from Stainless Steel.  The specific wetting agents provide fast wetting and contribute to the dispersion and loosening of soils and dirt.    Suitable for use on all stainless steels, copper, brass and ferrous substrates.


DYNAPREP S200

Powdered high-performance, non-etch, non-silicated, non-caustic, alkaline soak cleaner that is very effective in removing soils and lubricants from aluminum surfaces. Dynaprep S200 does not leave a difficult to remove film typical non-etch cleaners and is also suitable for use as a multi-metal soak cleaner for all substrates including zinc die-cast.


DYNAPREP S201

High detergent, mildly alkaline, emulsifying, non-etch soak cleaner for aluminum. Since Dynaprep S201 does not contain silicates, no residual siliceous films remain to cause a non-uniform appearance after electroless nickel plating.  Dynaprep S201 contains no EDTA, providing a waste treatment friendly product. At recommended concentration, and temperature Dynaprep S201 will not etch aluminum.


DYNAPREP S202

 

Low foaming version of Dynaprep S200

 

 


DYNAPREP S250

Heavy duty, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper and brass.  Dynaprep S250 is non-chelated and non-emulsifying.


DYNAPREP S250 NPF

Heavy duty, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper and brass.  Dynaprep S250-NPF is non-chelated, non-emulsifying, does not contain nonylphenols and is octylphenol free.


DYNAPREP S260

Dynaprep S260 is a heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel.  Dynaprep S260 is an oil-splitting cleaner that is effective at removing most soils including water-soluble oils, mineral oils, drawing compounds and buffing compounds.  Dynaprep S260 does not contain alkylphenols nor alkylphenol ethoxylates.


DYNAPREP S270

Heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel.  Dynaprep S270 is an emulsifying cleaner that is effective at removing most soils including water-soluble oils, mineral oils and drawing.


DYNAPREP S280

DYNAPREP S280 is a concentrated liquid acidic soak cleaner / conditioner for use on ferrous metals, aluminum, zinc, copper, copper alloys and stainless steel.   This cleaner will remove light oils, rust, rust, heat scale, weld scale and oxides as well as condition ferrous, aluminum and zinc surfaces into a metal-phosphate surface which serves as a paint base.


DYNAPREP S281

Concentrated liquid acidic soak cleaner for use on steel parts prior to galvanizing.  

 


DYNAPREP S290

Dynaprep S290 is a multi-purpose, heavy duty, concentrated, powdered, high alkalinity immersion soak cleaner for ferrous metal.  Dynaprep S290 is an emulsifying cleaner that is effective at removing most soils including heavily chlorinated and sulphurized oils, fats, and coolants from metal substrates.  Its unique formulation allows complete lifting of soils and emulsification of oils, reducing residuals on washed parts.


DYNAPREP S291

Heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel.  Dynaprep S291 is an emulsifying cleaner that is effective at removing most soils including water-soluble oils, mineral oils and drawing.

 


DYNAPREP S500

Dynaprep S500 is a non-caustic, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper, brass and aluminum.  Dynaprep S500 is non-chelated and is an excellent choice for difficult to remove soils in short cleaning cycles.  


DYNAPREP S500A

Dynaprep S500A is a non-caustic, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper, brass and aluminum.  Dynaprep S500A is non-chelated and is an excellent choice for difficult to remove soils in short cleaning cycles.  


DYNAPREP S600

Dynaprep S600 is a mildly alkaline, concentrated powdered soak cleaner formulated for removing buffing compounds from steel, zinc die-cast, copper, brass and aluminum.


DYNAPREP SE300

Concentrated liquid surfactant package suitable for both soak and electro cleaning of steel, cast iron and stainless steel. This is a medium alkalinity, non-chelated, heavy-duty soak and electro cleaner formulated to be effective with or without reverse electro cleaning. Can be emulsifying or oil splitting depending on caustic level, customer adds own caustic for best economy.


DYNAPREP SE300 NF

Nonylphenol and nonylphenol ethoxylate free version of DYNAPREP SE300.

 

 

 


DYNAPREP SE350

DYNAPREP SE350 is a liquid, heavy duty cleaner suitable for both soak and electro cleaning of steel, cast iron and stainless steel.  This is a medium alkalinity, heavy-duty product formulated to be effective with or without reverse electro cleaning. 


DYNAPREP SE355

Liquid, heavy duty cleaner suitable for both soak and electro cleaning of steel, cast iron and stainless steel.  This is a high alkalinity, phosphate free, heavy-duty product formulated to be effective with or without reverse electro cleaning. 


DYNAPREP SE400

Powdered, mildly alkaline cleaner suitable for both soak and electro cleaning of most substrates including steel, copper, brass and zinc die cast.


DYNAPREP SE401

Dynaprep SE401 is a concentrated powdered mildly alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals.  Formulated with a corrosion inhibitor to protect steel, copper and copper alloys when manufacturing operations are performed prior to final coating. 


DYNAPREP SE402

Phosphate free, concentrated powdered alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals.  


DYNAPREP SE403

Concentrated powdered mildly alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals



DYNAPREP SE550

Concentrated powdered mildly alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals.  Dynaprep SE550 can be used for cathodic electrocleaning of steel, stainless steel and nickel activation.  It is also effective as an anodic or cathodic electrocleaner for brass and zinc die-castings.


DYNAPREP SP140

Concentrated liquid product, designed for use as an immersion or spray cleaner for ferrous metal substrates.  DYNAPREP SP140 provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, coolants and dry film lubricants.


DYNAPREP SP140 NF

 Concentrated liquid product, designed for use as an immersion or spray cleaner for ferrous and non-ferrous metal substrates.  DYNAPREP SP145 provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, coolants and dry film lubricants.


DYNAPREP SP295

Dynaprep SP295 is a multi-purpose, heavy duty, concentrated, powdered cleaner formulated for use as immersion or spray cleaner for all metals including aluminum.  Dynaprep SP295 provides safe, effective removal of manufacturing soils, including heavily chlorinated and sulphurized oils, fats and coolants from metal substrates.


DYNAPREP SSE

High detergency, low foaming and concentrated liquid alkaline product for use as an immersion, spray or electro cleaner for ferrous metal substrates.  DYNAPREP SSE provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, and coolants.