HEAVY METAL PRECIPITANTS


Product Variants:

DYNATREAT MP-12

Polymerized inorganic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals - including chelated and complexed ions. DYNATREAT MP-12 precipitates a wide variety of metals simultaneously. The reaction forms insoluble metallic precipitates with minimal sludge generation. DYNATREAT MP-12 formulation includes a polymer, matched to metallic precipitates, to facilitate solids/liquid separation. It does not contain carbamates. DYNATREAT MP-12 can be used in new or existing wastewater treatment systems. Use in conjunction with DYNATREAT coagulants and flocculants.


DYNATREAT MP-88

Heavy Metal Precipitant

DYNATREAT MP-88 is a polymerized inorganic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals - including chelated and complexed ions. DYNATREAT MP-88 precipitates a wide variety of metals simultaneously. The reaction forms insoluble  metallic precipitates with minimal sludge generation. DYNATREAT MP-88 formulation includes a polymer, matched to metallic precipitates, to facilitate solids/liquid separation. It does not contain carbamates. DYNATREAT MP-88 can be used in new or existing wastewater treatment systems. Use in conjunction with DYNATREAT coagulants and flocculants.


DYNATREAT MP-915

Heavy Metal Precipitant

DYNATREAT MP-915 is a liquid formulated for the reduction of hexavalent chromium and the removal of heavy metals from the effluents of plating baths, etching solutions and rinses in one step. DYNATREAT MP-915 is a key component of an overall heavy metal removal system.

DYNATREAT MP-915 will reduce the concentration of the following metals to acceptable levels from most waste streams: Ag, Cd, Co, Cu, Cr, Fe, Hg, Mn, Ni, Pb, Sn and Zn.


DYNATREAT MP-970

Heavy Metal Precipitant

 DYNATREAT MP-970 is an organic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals - including chelated and complexed ions. The reaction forms insoluble organo-metallic compounds with minimal sludge generation.  This product does not contain disulfides.


DYNATREAT MP-AM

Heavy Metal Precipitant

DYNATREAT MP-AM is a heavy metal precipitant used to remove metals from waste water streams. It is particularly useful in the treatment of waste water from plating operations. The product is effective over a wide pH range and, when used as recommended, provides nearly complete precipitation of metals, even in the presence of other chelating or sequestering agents.

The sludge cake produced from its use is compact, highly insoluble, and easily dewatered. Its low solubility means that it is less susceptible to leaching and is more likely to pass leaching tests.

Use in conjunction with DYNATREAT coagulants and flocculants.


DYNATREAT MP-HS

DYNATREAT MP-HS is a liquid inorganic compound formulated to serve as a heavy-metal precipitant and stabilizer of heavy metals from plating, printed circuit board and other liquid waste streams.

 

Use in conjunction with DYNATREAT coagulants and flocculants.

 

DYNATREAT MP-HS works well in neutral pH environments (pH 4 – 8).  When used for the reduction of hexavalent chromium, the sulphide component reduces the hexavalent chromium to trivalent chromium, with the ferrous component acting as a catalyst to the reaction


DYNATREAT MP-TR

Heavy Metal Precipitant

DYNATREAT MP-TR is a proprietary liquid compound formulated to serve as a non-toxic heavy-metal precipitant of heavy metals from industrial process wastewaters, including metals from chelated/complexed environments.

DYNATREAT MP-TR is a safe alternative to D.T.C./carbamate-type precipitants and will perform at about ½ the dosage. DYNATREAT MP-TR will reduce the concentration of the following metals: Ag, Au, Cd, Co, Cu. Fe, Hg, Mn, Ni, Pb, and Zn.