HOT DIP GALVANIZING PRODUCTS

 


Product Variants:

DYNACOAT #6

DYNACOAT #6 provides a clear, hard colourless film that prevents white rust and staining on zinc galvanized steel surfaces during storage.

 

FEATURES 

·         Concentrated product that is diluted with water.

·         Can be applied by spray or immersion.

·         Also suited for continuous strip line applications.

·         Prevents white rust and storage stains on zinc galvanized steel surfaces.

·         Will not interfere with subsequent welding or soldering operations.


DYNAGALV AS

 

DYNAGALV AS is an additive that is added to zinc and ammonium chloride galvanizing fluxes to promote bonding and eliminate explosions when entering the molten zinc bath.

 

 

 FEATURES

·         Reduces zinc consumption by eliminating splatter.

·         Increases operator safety. 

·         Increases productivity by improving shedding of the flux solution. 

·         Reduces labour involved in resurfacing of galvanized parts. 

·         Reduces ash and smoke. 

·         Reduces flux consumption. 

·         Improves surface quality and uniformity of galvanized work.

 

 


DYNAPREP FCA

DYNAPREP FCA is a concentrated liquid mixture, which is added to hydrochloric or sulphuric acid pickling solutions to reduce the acid fumes without the aid of a foam blanket.

  

FEATURES 

·         Liquid concentrate. 

·         Reduces fuming by reducing the hydrogen gas produced in solution.                 

·         Reduces or eliminates hydrogen embrittlement. 

·         Has no adverse effect on subsequent finishing processes. 

·         Improves the working environment of the plant and reduces the maintenance cost of surrounding equipment. 

·         Can be added to the bulk storage tank or to the pickling solution.


HOT-DIP GALVANIZING PRE-FLUX

Galvanizing pre-fluxes, or dry kettle galvanizing fluxes, are used to dissolve any oxide films and impurities which are formed on the steel surface after pickling, but before galvanizing. Fluxes also ensure that a wettable and clean metal surface will come in contact with the molten zinc metal.  

FLUX TYPE

ACN

COMMON USE

Mono Salt 

0.39

Galvanizing sheet drying oven required

Double Salt

0.79

Galvanizing pipe, drying oven required

Triple Salt

1.17

Basic galvanizing flux used in North America

Quadraflux

1.6

General purpose flux